Evaporative Cooling Servicing · Sawtell
Sawtell evaporative cooling servicing covers existing units — FHC does not offer new evaporative installations on the basis that reverse cycle is generally the better spend for coastal Mid North Coast positions. Where a Sawtell home already has evaporative cooling installed, pre-summer servicing catches wear items before summer use.
Evaporative cooling servicing across Sawtell
A standard Sawtell evaporative service visit covers the drive belt (tension, wear, alignment), motor and bearings, water pump operation, pad condition and water distribution, controller settings, and final operational testing. Typical 1-2 hour visit, business-hours call-out $132 AUD including first hour of labour. Roof access on some Sawtell installations can extend the visit — FHC scopes this during booking.
Common findings on longer-standing Sawtell evaporative systems include worn drive belts (a common preventative-catch item), pump wear producing weak water distribution across pads, pad degradation from years of use, and controller PCB decay on older units. Where a repair is warranted, quotes are provided in writing before work commences.
What FHC delivers on every evaporative cooling servicing
Evaporative cooling servicing covers the existing system as installed — FHC handles servicing and repairs on evaporative cooling systems but does not offer new evaporative cooling installations, on the basis that reverse cycle is generally the better spend for coastal Mid North Coast homes. A scheduled service inspection covers the drive belt (tension, wear, alignment), the motor and its bearings, the water pump (operation, priming), the cooling pads (condition, water distribution across the surface), the water distribution system (bleed and refill operation), and the controller. Final operational testing confirms the unit is cooling to expected output before the visit ends.
Typical timeline is 1 to 2 hours for a standard service or repair visit; difficult roof access or awkward unit location can extend the job. Common findings include worn or slipping drive belts (a common preventative-catch item), pump wear producing weak water distribution across pads, pad degradation from prolonged use, and controller PCB decay on older systems. Preventative servicing before summer is the right rhythm — evaporative units left through winter without a pre-summer check often show unexpected failures on first use.
Business-hours call-out is $132 AUD including the first hour of labour; additional labour, parts and freight are separate. FHC holds an ARCtick licence (AU069269) for any refrigerant-adjacent work on hybrid systems and $5 million public liability insurance. A 12-month workmanship warranty applies where conditions apply.
Why FHC Refrigeration for evaporative cooling servicing
- • FHC services evaporative cooling on existing systems — new installs not offered (reverse cycle is generally better spend on the coastal Mid North Coast)
- • $132 AUD business-hours call-out including first hour of labour; 1-2 hours for a standard service
- • ARCtick licence AU069269 + $5M public liability; 12-month workmanship warranty*
Frequently asked
How often should Sawtell evaporative cooling be serviced?
Annually before summer use is the standard recommendation. Evaporative units left through winter without a pre-summer check often show unexpected failures on first use — a service catches worn belts and pump wear before they cause a peak-season breakdown.
What does FHC find most often on Sawtell evaporative service visits?
Worn drive belts, pad degradation, pump wear producing weak water distribution, and controller decay on older units are the standard findings. Preventative servicing catches each of these before they become peak-season breakdown calls.
