Evaporative Cooling Servicing · Urunga
Urunga's river-mouth position produces combined salt-and-estuary humidity that limits evaporative cooling effectiveness — new evaporative installations aren't recommended here. FHC services existing installations with the standard pre-summer discipline that catches wear items before peak use.
Evaporative cooling servicing across Urunga
Standard 1-2 hour Urunga evaporative service visit covers drive belt, motor, pump, cooling pads, water distribution and controller — $132 AUD business-hours call-out including the first hour of labour. FHC coordinates visits with the regular southern-run schedule for Urunga.
On aging Urunga evaporative installations, common findings include worn belts, pump wear, pad degradation and older-controller decay. Retiree owner-occupiers who form a substantial share of the Urunga customer base generally value honest assessment — where an evaporative system's repair costs would exceed a reasonable share of reverse-cycle replacement, FHC will say so.
What FHC delivers on every evaporative cooling servicing
Evaporative cooling servicing covers the existing system as installed — FHC handles servicing and repairs on evaporative cooling systems but does not offer new evaporative cooling installations, on the basis that reverse cycle is generally the better spend for coastal Mid North Coast homes. A scheduled service inspection covers the drive belt (tension, wear, alignment), the motor and its bearings, the water pump (operation, priming), the cooling pads (condition, water distribution across the surface), the water distribution system (bleed and refill operation), and the controller. Final operational testing confirms the unit is cooling to expected output before the visit ends.
Typical timeline is 1 to 2 hours for a standard service or repair visit; difficult roof access or awkward unit location can extend the job. Common findings include worn or slipping drive belts (a common preventative-catch item), pump wear producing weak water distribution across pads, pad degradation from prolonged use, and controller PCB decay on older systems. Preventative servicing before summer is the right rhythm — evaporative units left through winter without a pre-summer check often show unexpected failures on first use.
Business-hours call-out is $132 AUD including the first hour of labour; additional labour, parts and freight are separate. FHC holds an ARCtick licence (AU069269) for any refrigerant-adjacent work on hybrid systems and $5 million public liability insurance. A 12-month workmanship warranty applies where conditions apply.
Why FHC Refrigeration for evaporative cooling servicing
- • FHC services evaporative cooling on existing systems — new installs not offered (reverse cycle is generally better spend on the coastal Mid North Coast)
- • $132 AUD business-hours call-out including first hour of labour; 1-2 hours for a standard service
- • ARCtick licence AU069269 + $5M public liability; 12-month workmanship warranty*
Frequently asked
Should older Urunga evaporative systems be replaced with reverse cycle?
On aging systems where repair costs are stacking up, generally yes — reverse cycle handles the Urunga combined-environment humidity meaningfully better than evaporative can. On newer or well-maintained evaporative systems still performing acceptably, continued servicing may be reasonable. FHC gives an honest assessment on inspection.
How often should Urunga evaporative cooling be serviced?
Annually before summer use is the standard recommendation. Units left through winter without a pre-summer check often show unexpected failures on first use, and Urunga's combined salt-and-estuary environment doesn't treat neglected equipment kindly.
